Design and Physical Specifications of the Sticker
- Must be weather resistant to ensure durability under various climatic conditions.
- Color specifications: white or white reflecting letters on a red background.
- Size specifications:
- Character height: at least 5 millimeters.
- Character width: at least 5 millimeters.
- Sticker width: between 70 to 90 millimeters.
- Sticker height: between 40 to 50 millimeters.
- The text "NOT ALLOWED TO PARK IN AN ENCLOSED PARKING SPACE" must be centered on the sticker for clarity and visibility.
Production and Application Protocol
- The sticker is produced exclusively by conversion shops authorized or licensed by the Department of Trade and Industry.
- Must be affixed on the upper-left corner of the vehicle's windshield.
- Application of the sticker is a pre-requisite for the issuance of the Certificate of Inspection and Maintenance Compliance (IMC).
- This procedure is established by Memorandum Circular No. RIB-2007-891 dated October 24, 2007.
Administrative Authority and Enforcement
- The Department of Trade and Industry and the Land Transportation Office oversee the licensing of conversion shops responsible for sticker production and application.
- The Assistant Secretary of the Land Transportation Office issued the memorandum circular to ensure guidance and strict compliance with the sticker regulations.
Legal Effect and Compliance
- The sticker serves as a visible warning and compliance measure to prevent LPG-fueled vehicles from parking in enclosed spaces, enhancing safety.
- Failure to comply with this requirement could affect the issuance of the IMC, thereby impacting the vehicle's legal operation on the road.
Official Promulgation
- The specifications and procedures were officially adopted on June 17, 2008, as indicated by the signature of the Assistant Secretary, Alberto H. Suansing.